FAQ – frequently asked questionsQ
Which device right for me?
a: As a DIY enthusiast, you’re chroming items for home use, for family and friends. Maybe you want to start your own business in a growing market?
b: As a craftsman, would you like to expand your range with chrome-plated items or offer your customers the chrome-plating service?
c: As a craft, workshop or paint shop, you want to benefit from the ever-increasing demand for chrome-plated parts?
No matter how high your requirements, we certainly have the right device for you!
If you are not sure which device suits your needs, then call us and we will advise you personally.
How does a CHROME MASTER arrangement look?
The CHROME MASTER system is a divisible and slightly transportable arrangement which is equipped with 15 litres of containers. The containers are connected with the more adaptable pipes with each other. There is still a distributor block with special atomizers. The control during the plating process is realized by the manometres and the tumbler switch. Under the front record there is a specially disposal place.
How runs of the plating process?
For the moment one should coat a surface with an activation layer. Then the surface with distilled water without ions is rinsed. In the surface prepared materials are sprayed in addition, they form a reflecting-shining metal layer. This surface is covered at the end with varnish.
Which adjustment needs one to carry out around plating process?
To cover the surface with the activation layer or to cover with the varnish, one needs an adjustment like with the usual varnish. The plating is carried out only with the help of the CHROME MASTER system covered.
Should one have a varnishing experience?
NO. The plating process lasts 5-6 HRS if ultrared are used with the dry. It is recommended to wait with complicated forms with the spraying 24 HRS, so that the surface is completely dry.
How long lasts of the plating process?
In spite of the fact that this technology only for CHROME MASTER is typical, one needs to the varnish neither skills nor special preparations. There are no problems, this also solves the provided CD / DVD and if necessary our service.
Does one need a special space for these works?
No! The main terms of the coating are dust freedom and temperatures > 20°C, otherwise it requires nobody special no demands.
How high is the cost of sales in comparison to traditional galvanic platings?
The plating process with the help of CHROME MASTER costs 30% less than the same chromium-plating with galvanic procedures. No dangerous materials are used while chromium-plating.
May one use activation reason or protective varnish which come from other manufacturers?
NO! Our company offers especially developed activation reason and protective varnish which develops actively for the metallic layer. If one uses products of other companies, it can become matt surface became!
Is the coating hard enough and wear-firmly?
The metal layer, after it was covered with the protective varnish, is as hard and wear-firm like the colour on your car which was applied work-sided. The protective varnish passes the raised wear firmness and of the materials hardness guarantee
What is better for the water purification? A distillation device or deionisation device?
The water contains less foreign matters if it is cleaned by distillation device. This can be quite simply checked with the conducting meter. In spite of a high power consumption and not higher productiveness, a distillation device is more favorably in use an application. After the cleaning of 300-400 litres of water the membrane of the deionisation device must be substituted.
Is there a difference between the materials those of your company are produced and the materials of other companies?
All materials one uses with the plating, have the same composition. But our company, in contrast to others, produces no material which contains 6 valued toxic chrome!
How can one order CHROME MASTER system and consumption materials?
The delivery and installation is taken over from verchromen24 in Europe!